Coatings that only react when irradiated with UV light. Curing takes place in a few seconds. They have almost 100% solid content and must be used in properly constructed UV coating lines. Their importance is dramatically increasing due to several reasons:

• Fast drying
• high productivity
• high solid content
• limited solvent emission
• complience with environmental issues.

• Fast drying
• Single pack
• Unlimited pot life
• Medium - low quality finishing.

Their importance is increasing due to environmental and health and safety considerations. Storage is unlimited as waterborne coatings are not flammable and can be thinned with tap water.

• Storage is unlimited
• Non-flammable
• Thinned with tap water.

• Fast drying
• Low solid content with poor light fastness
• Single pack
• High solvent release during drying
• Medium - low quality finishing.

Elasticity is lower than P.U. successfully used for pore systems, especially on highly absorbing substrates such as MDF or chipboard.

• 3 pack system
• Very high build
• Excellent hardness and chemical resistance
• An ideal basecoat for high gloss finishing.

By far the most successful for high quality finishing. They represent the best compromise of elasticity, hardness and chemical resistance. Choosing from a wide range of hardners allows a wide range of applications.

• 2 pack system
• Very high build
• Balanced elasticity, hardness and
  chemical resistance
• Ideal for high quality finishing.